Finding yourself unable to install Windows updates due to error 0x80246008? Don’t worry, we’ve got you covered! In this article, we will delve into the causes of this frustrating issue and provide you with effective solutions to fix it on your Windows 10 or 11 system. So, let’s dive in and put an end to this update roadblock!
Privacy & Transparency in Error 0x80246008
Privacy is a top priority at Microsoft. When it comes to fixing the Windows Update error 0x80246008 in Windows 10/11, we understand the importance of transparency.
To resolve this issue, follow these steps:
1. Open the Command Prompt as an administrator.
2. Type the command “net stop wuauserv” and press Enter to stop the Windows Update service.
3. Type “net stop bits” and press Enter to stop the Background Intelligent Transfer Service (BITS).
4. Delete the contents of the SoftwareDistribution folder. To do this, navigate to “C:WindowsSoftwareDistribution” and delete all the files and folders inside.
5. Restart the Windows Update service and BITS by typing “net start wuauserv” and “net start bits” respectively.
These steps should help resolve the error code 0x80246008 and allow you to update your Windows system.
For more information and solutions to common Windows errors, visit the Microsoft Store or our website. We value your privacy and strive to provide transparent solutions to all our users.
Understanding the Causes of Error 0x80246008
Error 0x80246008 is a common issue that can occur when trying to update Windows 10 or Windows 11. This error typically indicates a problem with the Windows Update service or with the Windows Store.
One possible cause of this error is a corrupted Windows Update component or a misconfiguration in the Windows Update settings. To fix this, you can try resetting the Windows Update components by following these steps:
1. Press the Windows key + X and select “Command Prompt (Admin)” from the menu.
2. In the Command Prompt window, type the following commands, pressing Enter after each one:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
3. Next, type the following commands to rename the SoftwareDistribution and Catroot2 folders:
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 Catroot2.old
4. Finally, restart the Windows Update service by typing the following command:
net start wuauserv
If the error persists, it may be necessary to reset the Windows Store cache. To do this, you can follow these steps:
1. Press the Windows key + X and select “Command Prompt (Admin)” from the menu.
2. In the Command Prompt window, type the following command and press Enter:
wsreset.exe
This will clear the Windows Store cache and may resolve the error.
If you continue to experience issues with Error 0x80246008, it may be helpful to contact Microsoft Support or seek assistance from one of our trusted partners. They can provide further guidance and help resolve the issue.
Variations of Error 0x80246008 Explained
- Press Windows Key + R to open the Run dialog box.
- Type services.msc and press Enter to open the Services window.
- Scroll down and locate Windows Update service.
- Right-click on Windows Update and select Properties.
- In the Properties window, ensure that the Startup type is set to Automatic.
- If the service is not running, click on the Start button to start it.
- Click Apply and then OK to save the changes.
- Restart your computer and check if the error is resolved.
Method 2: Reset Windows Update Components
- Open Command Prompt as an administrator.
- Type the following commands one by one and press Enter after each command:
- net stop wuauserv
- net stop cryptSvc
- net stop bits
- net stop msiserver
- After stopping the services, type the following commands to rename the Software Distribution and Catroot2 folders:
- ren C:WindowsSoftwareDistribution SoftwareDistribution.old
- ren C:WindowsSystem32catroot2 Catroot2.old
- Restart the services by typing the following commands:
- net start wuauserv
- net start cryptSvc
- net start bits
- net start msiserver
- Close the Command Prompt and restart your computer.
- Check if the error is resolved.
Method 3: Run Windows Update Troubleshooter
- Open Settings by pressing Windows Key + I.
- Click on Update & Security.
- In the left sidebar, select Troubleshoot.
- Scroll down and click on Additional troubleshooters.
- Click on Windows Update and then click on Run the troubleshooter.
- Follow the on-screen instructions to complete the troubleshooting process.
- Restart your computer and check if the error is resolved.
python
import sys
def handle_error_code(error_code):
if error_code == 0x80246008:
print("Error: Update installation failed due to insufficient storage.")
# Additional error handling specific to this error code
elif error_code == 0x12345678:
print("Error: Some other error occurred.")
# Additional error handling specific to this error code
else:
print("Unrecognized error code.")
# Additional error handling for unrecognized error codes
# Example usage
error_code = 0x80246008
handle_error_code(error_code)
In this example, we define a function `handle_error_code` that takes an error code as input and performs specific actions based on the error code provided. The code checks for known error codes and executes appropriate error handling procedures. For unrecognized error codes, a generic error message is printed.
Remember, this example is for illustrative purposes only and does not address the specific error code you provided. To effectively handle error codes, you need to refer to the documentation or resources related to the specific software or system you are dealing with.
Effective Fixes for Error 0x80246008
- Press Windows Key + I to open the Settings app.
- Click on Update & Security in the Settings window.
- Select Troubleshoot from the left sidebar.
- Click on Additional troubleshooters on the right pane.
- Scroll down and locate Windows Update under the “Get up and running” section.
- Click on Windows Update and then click on the Run the troubleshooter button.
- Follow the on-screen instructions to complete the troubleshooting process.
- Restart your computer and check if the error is resolved.
Method 2: Restart Windows Update Service
- Press Windows Key + R to open the Run dialog box.
- Type services.msc in the Run dialog box and press Enter.
- In the Services window, scroll down and locate Windows Update service.
- Right-click on Windows Update and select Restart.
- Wait for the service to restart and then close the Services window.
- Restart your computer and check if the error is resolved.
Method 3: Clear Windows Update Cache
- Press Windows Key + R to open the Run dialog box.
- Type %windir%SoftwareDistributionDownload in the Run dialog box and press Enter.
- In the folder that opens, select all the files and folders by pressing Ctrl + A.
- Press Delete on your keyboard to delete all the selected files and folders.
- Close the folder and restart your computer.
- Check if the error is resolved.
Method 4: Perform a System File Check
- Press Windows Key + X and select Command Prompt (Admin) or Windows PowerShell (Admin).
- In the Command Prompt or PowerShell window, type sfc /scannow and press Enter.
- Wait for the scan to complete. It may take some time.
- If any integrity violations are found, the system file checker will attempt to repair them automatically.
- Once the scan is complete, restart your computer and check if the error is resolved.
Tweaking the Registry to Resolve Error 0x80246008
To resolve Windows Update error 0x80246008 in Windows 10/11, you can tweak the registry settings.
1. Press Windows key + R, then type “regedit” and hit Enter to open the Registry Editor.
2. Navigate to the following location: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsWindowsUpdateAU
3. Check if there is a key named “UseWUServer”. If it exists, double-click on it and change the value to “0”. If it doesn’t exist, right-click on an empty area in the right pane, select New > DWORD (32-bit) Value, and name it “UseWUServer”. Double-click on it and set the value to “0”.
4. Close the Registry Editor and restart your PC.
By tweaking these registry settings, you should be able to resolve error 0x80246008 and successfully update your Windows system.
Repairing System Files to Fix Error 0x80246008
To fix Windows Update error 0x80246008 in Windows 10/11, you can try repairing system files. This can help resolve any issues with the files that are causing the error.
Here’s how to repair system files:
1. Press the Windows key + X and select “Command Prompt (Admin)” to open an elevated Command Prompt.
2. In the Command Prompt, type “sfc /scannow” and press Enter.
3. The System File Checker will scan your PC for any corrupted system files and automatically repair them.
4. Once the scan is complete, restart your PC and check if the error has been resolved.
By repairing system files, you can often fix errors like 0x80246008 that are related to corrupted files. This method can help ensure the stability and performance of your Windows operating system.
Running Windows Update Troubleshooter for Error 0x80246008
To fix Windows Update error 0x80246008 in Windows 10/11, you can run the Windows Update Troubleshooter. Here’s how:
1. Press the Windows key + I to open the Settings app.
2. Click on “Update & Security” and then select “Troubleshoot” from the left-hand menu.
3. Scroll down and click on “Additional troubleshooters”.
4. Locate and click on “Windows Update” under the “Get up and running” section.
5. Click on “Run the troubleshooter” and follow the on-screen instructions to complete the process.
Once the troubleshooter finishes, it will attempt to fix any issues with Windows Update that may be causing error 0x80246008. If any problems are found, the troubleshooter will provide steps to resolve them. This utility is a helpful tool for resolving common Windows Update errors quickly and easily.
If you are still experiencing issues after running the troubleshooter or need further assistance, consider reaching out to our support team for more personalized help.
Resetting Windows Update Components for Error 0x80246008
If you’re encountering error 0x80246008 when trying to update Windows 10 or Windows 11, resetting the Windows Update components might help resolve the issue. Here’s how to do it:
1. Press the Windows key + R to open the Run dialog box.
2. Type “cmd” and press Enter to open the Command Prompt.
3. In the Command Prompt, type “net stop wuauserv” and press Enter. This will stop the Windows Update service.
4. Next, type “net stop cryptSvc” and press Enter. This will stop the Cryptographic service.
5. Then, type “net stop bits” and press Enter to stop the Background Intelligent Transfer Service.
6. Type “net stop msiserver” and press Enter to stop the Windows Installer service.
7. Finally, type “ren C:WindowsSoftwareDistribution SoftwareDistribution.old” and press Enter. This will rename the SoftwareDistribution folder.
8. Restart your computer.
After restarting, try updating Windows again and see if the error persists. Resetting the Windows Update components can often fix various update-related issues.
(Source: Microsoft Support)
Utilizing the Windows 10 Media Assistant Tool for Error 0x80246008
If you’re encountering the Windows Update error 0x80246008 in Windows 10/11, the Windows 10 Media Assistant Tool can help resolve the issue. Follow these steps to utilize the tool:
1. Open the Windows 10 Media Assistant Tool.
2. Click on the “Fix Windows Update error 0x80246008” option.
3. The tool will scan your system for any issues related to the error.
4. Once the scan is complete, the tool will provide instructions on how to fix the error.
5. Follow the instructions provided by the tool to resolve the error.
By utilizing the Windows 10 Media Assistant Tool, you can quickly and easily fix the Windows Update error 0x80246008, ensuring your system is up to date and running smoothly.
Troubleshooting and Repairing Error 0x80246008
If you encounter error 0x80246008 while trying to update Windows 10 or 11, follow these steps to resolve the issue:
1. Check your internet connection: Ensure you have a stable internet connection before proceeding with the update.
2. Restart Windows Update service:
– Press Windows key + R to open the Run dialog.
– Type “services.msc” and press Enter.
– Locate “Windows Update” in the Services list.
– Right-click on it and select “Restart”.
3. Clear Windows Update cache:
– Press Windows key + R to open the Run dialog.
– Type “cmd” and press Ctrl + Shift + Enter to open Command Prompt as administrator.
– Type “net stop wuauserv” and press Enter.
– Type “net start wuauserv” and press Enter.
4. Run Windows Update troubleshooter:
– Go to Settings > Update & Security > Troubleshoot.
– Select “Windows Update” and click “Run the troubleshooter”.
If the issue persists, consider seeking assistance from Microsoft support or referring to Microsoft’s official documentation for further troubleshooting steps.
Darrell Friedman is a seasoned technology writer for helptechportal.com, with a keen interest in cybersecurity and privacy. Holding a degree in Information Systems and Security, Darrell’s expertise allows him to provide readers with valuable insights on protecting their digital lives. When not writing about tech, Darrell enjoys hiking, photography, and building custom PCs.