Resolve Windows 10 Automatic Repair Loop – Quick Fix

If you’re tired of being stuck in a never-ending cycle of Windows 10 Automatic Repair, this article has a quick and easy solution for you.

Understanding the “Preparing Automatic Repair” Loop on Windows 10

If you’re stuck in the “Preparing Automatic Repair” loop on Windows 10, there’s a quick fix you can try. First, power off your PC by holding the power button. Then, power it back on and immediately press and hold the power button again to force it to shut down. Repeat this process three times. On the fourth time, your PC will boot into the “Automatic Repair” screen. From there, select “Advanced options” and then “Troubleshoot.” Next, select “Advanced options” again and then “Startup Repair.” Wait for the repair process to complete and then restart your PC. This should resolve the “Preparing Automatic Repair” loop issue. Note that this fix may not work for all PC brands, such as Lenovo or Dell. If you continue to experience issues, it may be best to seek professional help.

Hard Rebooting Your Computer to Fix the Loop

If you’re stuck in a Windows 10 Automatic Repair Loop, hard rebooting your computer might help. To do this, hold down the power button until your computer turns off completely. Wait a few seconds, then turn it back on.

If the loop persists, try booting your computer in Safe Mode. To do this, repeatedly tap the F8 key (or another key depending on your device) when your computer starts up. From there, you can try running a system restore or using the Command Prompt to fix the issue.

Remember, if you’re still having trouble with the Automatic Repair Loop, it might be best to seek out professional help. Common brands like Lenovo, Acer, Dell, and ASUS all have their own support teams that can help you resolve issues with your device.

Booting Your Computer in Safe Mode to Fix the Loop

Booting your computer in Safe Mode is a quick and effective way to fix the Automatic Repair Loop in Windows 10. Here’s how to do it:

1. Turn on your computer and repeatedly press the F8 key until you see the Advanced Boot Options screen.

2. Use the arrow keys to select Safe Mode and press Enter.

3. Once in Safe Mode, open the Start menu and type cmd. Right-click on Command Prompt and select Run as administrator.

4. In the Command Prompt window, type sfc /scannow and press Enter. This will scan your system for any corrupt files and repair them.

5. After the scan is complete, restart your computer and see if the Automatic Repair Loop has been resolved.

Remember, Safe Mode is a diagnostic mode and some features may not be available. If the issue persists, you may need to seek further assistance.


import os

def fix_auto_repair():
os.system('bcdedit /set {default} recoveryenabled No')
os.system('bcdedit /set {default} bootstatuspolicy ignoreallfailures')

fix_auto_repair()


This code uses the `os` module in Python to execute two command-line prompts. The first line disables automatic repair on Windows by changing the boot configuration data (BCD) setting for recovery to “No”. The second line sets the boot status policy to ignore all failures, which prevents the system from attempting automatic repairs.

Note that this is just a sample code and it may not work in all cases. It is important to exercise caution when making changes to the system settings and to seek professional assistance if necessary.

Rebuilding BCD with Command Prompt to Fix the Loop

Rebuilding BCD with Command Prompt to Fix the Loop
Description	One of the quick fixes for resolving the Windows 10 automatic repair loop is to rebuild the Boot Configuration Data (BCD) using Command Prompt.
Steps	Insert the Windows installation media and boot from it. Select your language preferences and click on Next. Click on Repair your computer. Select Troubleshoot > Advanced options > Command Prompt. Type the following command and press Enter: bootrec /rebuildbcd If prompted, select the Windows installation you want to repair and press Enter. Wait for the process to complete and then restart your computer.
Important Notes	Make sure you have the correct language preferences and keyboard input method selected before proceeding. You may have to replace bootrec /rebuildbcd with bootrec /fixboot or bootrec /fixmbr if those commands are more appropriate for your situation. If the automatic repair loop persists, you may need to try other solutions or seek professional help.

Disabling Automatic Repair at Boot to Fix the Loop

To disable Automatic Repair at boot and fix the loop in Windows 10, follow these steps:

1. Press and hold the power button to turn off your computer.
2. Turn on your computer and press F8 repeatedly to access the Advanced Boot Options menu.
3. Select Disable Automatic Restart on System Failure and press Enter.
4. Wait for your computer to restart and fail to start normally.
5. Press F8 again to access the Advanced Boot Options menu.
6. Select Disable Automatic Repair and press Enter.
7. Wait for your computer to start normally.
8. Once your computer has started, search for and download the latest Windows updates to prevent further issues.

This quick fix should resolve the automatic repair loop issue and allow you to use your Windows 10 computer normally again. If you’re still experiencing issues, consult your device manufacturer or contact Microsoft support for further assistance.

Running Fixboot and Chkdsk Commands to Fix the Loop

Command	Description
Fixboot	A command that repairs the boot sector of the Windows partition, which can resolve issues that prevent Windows from booting properly.
Chkdsk	A command that checks the file system for errors and bad sectors, and can repair them if possible. This can help to resolve issues that prevent Windows from booting properly.

Repairing Corrupted System Files to Fix the Loop

• Access the Command Prompt in the Windows Recovery Environment
• Boot your computer using a Windows installation media
  
• Select your language preferences and click on Next
• Click on Repair your computer
• Select Troubleshoot
• Select Command Prompt
• Perform a System File Checker scan
• Type sfc /scannow command and press Enter
• Wait for the scan to complete (it may take some time)
  
• Restart your computer
  
• Perform a DISM scan
• Type dism /online /cleanup-image /restorehealth command and press Enter
• Wait for the scan to complete (it may take some time)
  
• Restart your computer
  
• Use the Deployment Image Servicing and Management tool
• Type dism /online /cleanup-image /scanhealth command and press Enter
• If the scan detects any issues, type dism /online /cleanup-image /restorehealth command and press Enter
• Wait for the scan to complete (it may take some time)
  
• Restart your computer
  

Restoring the Windows Registry to Fix the Loop

• Boot from Windows Installation Media
• Insert the Windows installation media
• Restart your computer and press the appropriate key to enter the boot menu
• Select the installation media from the boot menu and press Enter
  
• Open Command Prompt
• Select the language and input preferences
• Click on Next
  
• Click on Repair your computer
• Select Troubleshoot
• Select Advanced options
• Select Command Prompt
  
• Identify the Drive Letter of the Windows Installation
• Type diskpart and press Enter
• Type list volume and press Enter
  
• Identify the drive letter assigned to the Windows installation partition
• Copy the Backup Registry Files to the Config Folder
• Type copy drive_letter:WindowsSystem32configRegBack*.* drive_letter:WindowsSystem32config and press Enter
• Type Yes and press Enter
  
• Replace the Corrupted Registry Files with the Backup Files
• Type copy drive_letter:WindowsSystem32configRegBackSAM drive_letter:WindowsSystem32config and press Enter
• Type Yes and press Enter
  
• Type copy drive_letter:WindowsSystem32configRegBackSYSTEM drive_letter:WindowsSystem32config and press Enter
• Type Yes and press Enter
  
• Type copy drive_letter:WindowsSystem32configRegBackSOFTWARE drive_letter:WindowsSystem32config and press Enter
• Type Yes and press Enter
  
• Exit Command Prompt and Restart your Computer
• Type exit and press Enter
• Select Continue to exit the Command Prompt
  
• Select Turn off your PC
• Restart your computer and check if the Automatic Repair Loop issue is resolved

Resetting or Refreshing Windows 10 to Fix the Loop

1. Backup your important files
• Copy important files to an external hard drive or cloud storage
  
2. Reset Windows 10
• Open Settings and click on Update & Security
• Select Recovery from the left-hand menu
• Under Reset this PC, click on Get started
• Choose whether you want to keep your personal files or remove everything
  
• Follow the on-screen instructions to complete the reset process
3. Refresh Windows 10
• Open Settings and click on Update & Security
• Select Recovery from the left-hand menu
• Under More recovery options, click on Learn how to start fresh with a clean installation of Windows
• Follow the on-screen instructions to download and create a Windows 10 installation media
  
• Boot your computer from the installation media and choose Install now
• Select Custom: Install Windows only (advanced)
• Select the partition where Windows is installed and click on Next
• Follow the on-screen instructions to complete the installation process
  

Troubleshooting Common Issues with “Preparing Automatic Repair”

If you’re experiencing a “Preparing Automatic Repair” loop when trying to boot up your Windows 10 device, there are several common issues that could be causing it. Here are some troubleshooting tips:

– **Perform a hard reset:** Unplug all external devices, remove the battery (if possible), and hold down the power button for 15 seconds. Then, plug everything back in and try to boot up again.

– **Use System Restore:** If you can access the Advanced Startup options, choose “System Restore” and select a restore point from before the issue started.

– **Run Startup Repair:** From the Advanced Startup options, choose “Startup Repair” and let Windows attempt to fix any issues automatically.

– **Disable Automatic Repair:** If none of the above options work, you can try disabling “Automatic Repair” altogether by running a command in the Command Prompt.

Remember to back up your important data before attempting any of these fixes, as they could potentially cause data loss. If you continue to experience issues, it may be necessary to seek professional help.

Best Practices for Preventing “Preparing Automatic Repair” Errors

• Regularly update your Windows 10 to ensure that your operating system is up-to-date and free from any bugs or glitches that may cause the “Preparing Automatic Repair” error.
• Run a virus scan to check for any malware or viruses that may have infected your computer and caused the error.
• Check your hardware components such as your hard drive, RAM, and motherboard to ensure that they are functioning properly and not causing the error.
• Disable fast startup as this feature can sometimes cause the “Preparing Automatic Repair” error to occur.
  
• Use System Restore to revert your computer back to a previous state before the error occurred.
• Perform a clean boot to diagnose and troubleshoot any software conflicts that may be causing the error.
  
• Reset your Windows 10 PC as a last resort if all other methods fail. This will reinstall Windows 10 and erase all data on your computer, so be sure to back up any important files before doing so.

Further Resources for Fixing “Preparing Automatic Repair” Errors on Windows 10

• Microsoft Support: Visit the official Microsoft support website and search for solutions to your specific error code.
• System Restore: Try restoring your computer to a previous point before the error occurred.
  
• Startup Repair: Use the built-in Startup Repair tool to automatically fix any issues preventing your computer from starting up properly.
• Check Disk (CHKDSK): Run a disk check to repair any bad sectors or errors on your hard drive.
• Reset Windows: Refresh or reset Windows to its default settings to fix any system file corruption issues.