I will provide methods and fixes to resolve Windows 10 Error Code 0xc00000e.
How to Resolve the Windows 10 Error Code 0xc00000e
Method 1: Check Boot Order in BIOS/UEFI
1. Restart your computer and access the BIOS/UEFI settings by pressing the designated key (usually F2, Del, or Esc) during startup.
2. Navigate to the “Boot” or “Boot Order” section.
3. Ensure that the hard disk drive or SSD containing Windows 10 is set as the first boot device.
4. Save the changes and exit the BIOS/UEFI settings.
Method 2: Use Windows Recovery Environment
1. Insert a Windows 10 installation media (USB or DVD) into your computer.
2. Restart your computer and boot from the installation media.
3. Select your language preferences and click “Next.”
4. Click “Repair your computer” at the bottom left corner of the screen.
5. In the Windows Recovery Environment, select “Troubleshoot” and then “Advanced options.”
6. Choose “Command Prompt.”
7. In the Command Prompt, type bootrec /fixmbr and press Enter.
8. Type bootrec /fixboot and press Enter.
9. Restart your computer and check if the error is resolved.
Method 3: Rebuild the BCD
1. Follow steps 1-6 from Method 2 to access the Command Prompt in the Windows Recovery Environment.
2. In the Command Prompt, type bootrec /rebuildbcd and press Enter.
3. When prompted, select the Windows installation you want to add to the boot list.
4. Restart your computer and check if the error is resolved.
Method 4: Check Hard Drive Connections
1. Turn off your computer and unplug all cables.
2. Open your computer’s case and check the connections of the hard drive or SSD.
3. Ensure that the SATA or power cables are securely connected.
4. Close the case, plug in all cables, and turn on your computer.
5. Check if the error is resolved.
Method 5: Reset Windows 10
1. Follow steps 1-4 from Method 2 to access the Windows Recovery Environment.
2. Select “Troubleshoot” and then “Reset this PC.”
3. Choose whether to keep your files or remove everything.
4. Follow the on-screen instructions to complete the reset process.
5. After the reset, check if the error is resolved.
Check Physical Device Connections
To resolve the Windows 10 error code 0xc00000e, it’s important to check your physical device connections. Follow these steps:
1. Ensure that all cables, including power and data cables, are securely plugged in to your computer and the respective devices.
2. If you’re using an external storage device, such as a USB flash drive or DVD, make sure it is properly connected to your computer.
3. Check the boot order in your computer’s BIOS settings. Make sure the device with the operating system is set as the first boot option.
4. If you’re using a USB device, try connecting it to a different USB port on your computer.
5. Restart your computer and check if the error code is resolved.
By checking your physical device connections, you can ensure that there are no issues with the hardware that could be causing the error code 0xc00000e. If the error persists, you can try other methods and fixes to resolve it.
python
import sys
try:
# Code that may cause an I/O error
file = open("myfile.txt", "r")
# Perform some operations on the file
file.close()
except IOError as e:
# Handle the specific I/O error
print(f"I/O Error: {str(e)}")
error_status = hex(sys.exc_info()[1].errno)
print(f"Error Status: {error_status}")
In this sample code, we attempt to open a file (“myfile.txt”) for reading. If an I/O error occurs (e.g., file not found, insufficient permissions, etc.), the code within the `except IOError` block will execute. It prints the error message and retrieves the error status using `sys.exc_info()[1].errno`, which might be useful for debugging or reporting purposes.
Rebuild BCD File
To resolve the Windows 10 error code 0xc00000e, you can try rebuilding the BCD (Boot Configuration Data) file. This can be done using the following methods:
1. Start by inserting your Windows installation media, such as a USB flash drive or DVD, into your computer.
2. Restart your computer and press the appropriate key (usually F12 or Esc) to access the boot menu. Select the option to boot from the installation media.
3. Once the Windows Setup screen appears, select your language, time, and keyboard preferences, and click “Next.”
4. On the next screen, click “Repair your computer” at the bottom-left corner.
5. In the next window, select “Troubleshoot,” then “Advanced options.”
6. From the Advanced options menu, select “Command Prompt.”
7. In the Command Prompt window, type the following command and press Enter: bootrec /rebuildbcd
8. The command will scan for Windows installations and prompt you to add them to the BCD. Type “Y” (without quotes) and press Enter to add the installations.
9. Once the process is complete, restart your computer and check if the error is resolved.
Rebuilding the BCD file can help fix the Windows 10 error code 0xc00000e and allow your computer to boot properly.
Rebuild BCR Registry Hive
To resolve the Windows 10 error code 0xc00000e, you can try rebuilding the BCR (Boot Configuration Data) Registry Hive. Here are the steps to do it:
1. Start your computer and press the Esc key or a specific keyboard shortcut to access the Windows Boot Manager.
2. Select the troubleshooting option and go to Advanced options.
3. Choose the Command Prompt option to open the command-line interface.
4. Type the following command and press Enter: cd /d C:WindowsSystem32config
5. Then, enter this command: ren BCD BCD.old
6. Now, type: bootrec /rebuildbcd and press Enter.
7. When prompted, type ‘Y’ to add the installation to the boot list.
8. Finally, restart your computer and check if the error is resolved.
Note: If the above method doesn’t work, you can also try using a Windows installation disc or USB to rebuild the BCR Registry Hive.
Remember to follow these steps carefully to avoid any data loss or further issues. If you need more assistance, consider seeking help from Microsoft support or consulting a professional technician.
By rebuilding the BCR Registry Hive, you can potentially fix the Windows 10 error code 0xc00000e and get your computer up and running again.
Use Automatic Repair Utility
Use the Automatic Repair utility to resolve Windows 10 error code 0xc00000e.
1. Start by accessing the Windows Boot Manager.
2. Press the Esc key or any other keyboard shortcut that activates the Boot Manager during startup.
3. Select the Automatic Repair option.
4. Follow the on-screen instructions to allow the utility to scan and fix any issues with your computer’s hardware and operating system.
5. If the Automatic Repair utility does not resolve the error, try using a USB mass storage device with a Windows installation media.
6. Connect the USB device to your computer and restart it.
7. Press any key to boot from the USB device when prompted.
8. Select your language preferences and click “Next.”
9. Click on “Repair your computer” at the bottom left corner.
10. Choose the Troubleshoot option and then select Advanced options.
11. From the list of options, select Automatic Repair.
12. Follow the prompts to complete the repair process.
If the error persists after trying these methods, it may be necessary to seek further assistance from a Microsoft Windows support professional or consult online resources for more advanced troubleshooting steps.
Reset the BIOS/UEFI Configuration
To reset the BIOS/UEFI configuration on your Windows 10 device and resolve the error code 0xc00000e, follow these steps:
1. Turn off your computer and disconnect all external devices.
2. Press the power button to turn on your computer, and immediately start pressing the Delete or F2 key repeatedly to enter the BIOS/UEFI setup.
3. In the BIOS/UEFI setup, navigate to the Reset or Restore Defaults option. This may be located in different menus depending on your computer’s manufacturer.
4. Select the Reset or Restore Defaults option and confirm your selection.
5. Save the changes and exit the BIOS/UEFI setup. This can usually be done by pressing the F10 key.
6. After your computer restarts, check if the error code 0xc00000e is resolved.
If the issue persists, you may need to perform a clean installation of Windows 10. This will erase all data on your computer, so make sure to back up any important files before proceeding.
Please note that these instructions may vary slightly depending on your computer’s manufacturer and BIOS/UEFI version. For more detailed instructions, refer to your computer’s documentation or the manufacturer’s website.
If you need further assistance, you can visit the Microsoft Support website for additional troubleshooting steps and resources.
Mark Boot Disk as Online
To mark the boot disk as online and resolve Windows 10 error code 0xc00000e, follow these steps:
1. Start by opening the Command Prompt as an administrator. You can do this by pressing the Windows key, typing “Command Prompt,” right-clicking on it, and selecting “Run as administrator.”
2. In the Command Prompt window, type “diskpart” and press Enter to open the DiskPart tool.
3. Next, type “list disk” and press Enter to see a list of available disks on your computer.
4. Identify the disk that you want to mark as online. Note the number associated with it.
5. Type “select disk [disk number]” and replace “[disk number]” with the actual number of the disk you want to mark as online. Press Enter.
6. Once the disk is selected, type “online disk” and press Enter to mark it as online.
7. You should see a message confirming that the disk is now online. Close the Command Prompt window.
8. Restart your computer and check if the error code 0xc00000e is resolved.
Wallace Kahn is an insightful technology writer for helptechportal.com, specializing in wearable tech and smart devices. With a degree in Electronics and Communications Engineering, Wallace’s writing combines technical knowledge with a passion for innovation. When not covering the latest tech gadgets, Wallace enjoys cycling and experimenting with home automation.