Windows 10 Wi-Fi Network Detection Fixes

Unleashing the Power of Seamless Connectivity: Windows 10 Wi-Fi Network Detection Fixes

Restart your computer and reset your Wi-Fi router: Sometimes, a simple restart can fix the issue. Turn off both your computer and Wi-Fi router, wait for a few seconds, and then turn them back on. This can often resolve any temporary glitches that may be causing the problem.

Troubleshooting network problems in Windows

If you’re facing network problems with your Windows 10 Wi-Fi connection, here are some fixes you can try:

1. Check Wi-Fi Network Detection:
– Click on the Wi-Fi icon in the taskbar to ensure Wi-Fi is turned on.
– If the Wi-Fi icon is not visible, go to the Network & Internet settings and enable Wi-Fi.

2. Run the Network Troubleshooter:
– Press the Windows key + I to open the Settings window.
– Go to Network & Internet > Status > Network troubleshooter.
– Follow the on-screen instructions to diagnose and fix any network issues.

3. Reset Wi-Fi Adapter:
– Press the Windows key + X and select Device Manager.
– Expand the Network adapters section.
– Right-click on your Wi-Fi adapter and select Uninstall device.
– Restart your computer and let Windows reinstall the driver.

These steps should help resolve common network problems in Windows 10.

When Windows 10 can’t detect Wi-Fi, it can feel like being stranded on a deserted island without any means of communication.

Things to try first

Open Device Manager by pressing Windows Key + X and selecting Device Manager.
Expand the Network Adapters category.
Locate your Wi-Fi adapter.
If the adapter has a yellow exclamation mark or a red X icon, right-click on it and select Enable.
If the adapter is enabled but still not functioning, right-click on it and select Disable, then right-click again and select Enable.

Method 2: Reset Wi-Fi AutoConfig Service

Press Windows Key + R to open the Run dialog box.
Type services.msc and press Enter.
Scroll down and find the WLAN AutoConfig service.
Right-click on it and select Restart.

Method 3: Update Wi-Fi Driver

Open Device Manager by pressing Windows Key + X and selecting Device Manager.
Expand the Network Adapters category.
Right-click on your Wi-Fi adapter and select Update driver.
Select Search automatically for updated driver software.
Follow the on-screen instructions to complete the driver update process.

Method 4: Run Network Troubleshooter

Click on the Start button and select Settings.
Go to Update & Security.
Select Troubleshoot from the left panel.
Click on Additional troubleshooters.
Choose Internet Connections and click on Run the troubleshooter.
Follow the prompts to complete the troubleshooting process.

Disable Airplane Mode

To disable Airplane Mode on your Windows 10 PC and resolve Wi-Fi network detection issues, follow these steps:

1. Open the Settings app by pressing Windows Key + I.
2. Click on the “Network & Internet” option.
3. In the left pane, select “Airplane mode.”
4. On the right side, toggle off the “Airplane mode” switch.

Note: If the Airplane mode toggle is grayed out or disabled, check if your laptop has a physical Wi-Fi switch or a keyboard shortcut to enable/disable Airplane mode. Make sure it is turned on.

5. After disabling Airplane mode, go back to the “Network & Internet” settings.
6. Click on “Wi-Fi” and ensure that the Wi-Fi toggle switch is turned on.
7. If your Wi-Fi network is not showing up, click on “Network reset” to reset your network settings.

python import subprocess


def check_wifi_status():

    try:

        output = subprocess.check_output(['netsh', 'wlan', 'show', 'interfaces'])

        return output.decode('utf-8')

    except subprocess.CalledProcessError as e:

        return str(e)

print(check_wifi_status())

This code utilizes the `subprocess` module in Python to execute the `netsh wlan show interfaces` command, which displays the status of all wireless interfaces on a Windows machine. The output of this command will be returned as a string.

By running this script, you can check the Wi-Fi status on a Windows 10 machine. It will either return the status information or an error message if there’s an issue with executing the command.

Please note that this code only displays the Wi-Fi status information, and it does not actively fix any Wi-Fi detection issues on Windows 10. It’s always recommended to check official documentation or consult with professionals for proper troubleshooting and resolution of Wi-Fi problems.

Run Network Adapter Troubleshooter

To troubleshoot network adapter issues on Windows 10, you can use the Network Adapter Troubleshooter. Here’s how:

1. Press the Windows key + I to open the Settings app.
2. Click on “Network & Internet.”
3. In the left pane, click on “Status.”
4. Scroll down and click on “Network Troubleshooter” under the “Advanced network settings” section.
5. A troubleshooting window will appear. Click on “Next” to start the troubleshooter.
6. The troubleshooter will automatically detect and fix any issues with your network adapter.

If the troubleshooter doesn’t resolve the problem, you can try some additional steps:

– Make sure the Wi-Fi switch on your laptop or PC is turned on.
– Restart your router and modem.
– Check if other devices can connect to your Wi-Fi network.
– Update your network adapter driver.

These steps should help you fix any Wi-Fi network detection issues on Windows 10.

Turn on Network Discovery

To turn on Network Discovery on Windows 10 and fix Wi-Fi network detection issues, follow these steps:

1. Open the Start menu and type “Control Panel” to access the Control Panel settings.
2. In the Control Panel window, click on the “Network and Internet” option.
3. Next, click on “Network and Sharing Center.”
4. In the left-hand menu, click on “Change advanced sharing settings.”
5. Under the “Network Discovery” section, select the option that says “Turn on network discovery.”
6. Click on the “Save changes” button to apply the settings.

By enabling Network Discovery, your Windows 10 device will be able to detect Wi-Fi networks and resolve any connection problems you may be experiencing. This can be especially helpful if your Wi-Fi network is not showing up or you cannot connect to it.

Set Proper Services Configuration

To set the proper services configuration for Windows 10 Wi-Fi network detection, follow these steps:

1. Press the Windows key + R to open the Run dialog box.
2. Type “services.msc” and press Enter to open the Services window.
3. In the Services window, scroll down and locate the “WLAN AutoConfig” service.
4. Right-click on the “WLAN AutoConfig” service and select “Properties”.
5. In the WLAN AutoConfig Properties window, go to the “General” tab.
6. Set the “Startup type” to “Automatic” and click on “Apply” and then “OK”.
7. Next, locate the “Wi-Fi Adapter” service in the Services window.
8. Right-click on the “Wi-Fi Adapter” service and select “Properties”.
9. In the Wi-Fi Adapter Properties window, go to the “General” tab.
10. Set the “Startup type” to “Automatic” and click on “Apply” and then “OK”.
11. Close the Services window.

By ensuring that the WLAN AutoConfig and Wi-Fi Adapter services are set to start automatically, you can fix Wi-Fi network detection issues on your Windows 10 device.

Reboot your Router

If you’re experiencing issues with your Wi-Fi network detection on Windows 10, one of the simplest and most effective troubleshooting steps you can take is to reboot your router. This can help resolve connection problems and improve the performance of your Wi-Fi network.

To reboot your router, follow these steps:

1. Locate your router and find the power cable.
2. Unplug the power cable from your router.
3. Wait for about 30 seconds.
4. Plug the power cable back into your router.
5. Wait for your router to fully restart.

Once your router has restarted, check if the Wi-Fi network detection issue has been resolved. If not, you may need to try other troubleshooting steps or contact your internet service provider for further assistance.

Change SSID & Password on WiFi Router

To change the SSID (network name) and password on your WiFi router, follow these steps:

1. Connect your laptop or device to the WiFi network you want to modify.

2. Open a web browser and enter the default IP address of your router in the address bar. This is usually listed on the router or in the user manual.

3. Enter your router’s username and password to access the settings page. If you’re unsure, check the default username and password in the user manual or contact your Internet Service Provider (ISP).

4. Look for the Wi-Fi or Wireless settings tab. Here, you can change the SSID (network name) and password.

5. Enter a new SSID and password of your choice. Make sure to choose a strong password to secure your network.

6. Save the changes and wait for the router to restart.

7. Reconnect your devices to the new WiFi network using the updated SSID and password.

Update Wireless Network Driver Software

To update your wireless network driver software in Windows 10, follow these steps:

1. Press the Windows key + X and select “Device Manager” from the menu.
2. In the Device Manager window, expand the “Network adapters” category.
3. Locate your Wi-Fi adapter and right-click on it, then select “Update driver.”
4. Choose the option to search automatically for updated driver software.
5. Windows will search for the latest driver software and install it if available.

If you still experience Wi-Fi connection problems after updating the driver, try these additional steps:

1. Press the Windows key + X and select “Network Connections” from the menu.
2. Right-click on the Wi-Fi network you are trying to connect to and select “Forget network.”
3. Restart your computer and then reconnect to the Wi-Fi network.

These steps should help resolve any issues with your Wi-Fi network detection in Windows 10.

Reinstall Wireless Network Adapter Driver

To reinstall the wireless network adapter driver in Windows 10 and fix Wi-Fi network detection issues, follow these steps:

1. Press the Windows key + X and select “Device Manager” from the menu.
2. In Device Manager, expand the “Network adapters” category.
3. Right-click on your wireless network adapter and select “Uninstall device.”
4. Check the box that says “Delete the driver software for this device” and click “Uninstall.”
5. Restart your computer.
6. After restarting, Windows will automatically reinstall the driver for your wireless network adapter.
7. If the driver is not automatically installed, you can manually install it by downloading the latest driver from the manufacturer’s website and running the setup file.
8. Once the driver is installed, check if the Wi-Fi network detection issue is resolved.

Update network drivers

Update Network Drivers

To fix Wi-Fi network detection issues on Windows 10, it is important to update your network drivers. Outdated or incompatible drivers can cause connectivity problems and prevent your device from detecting Wi-Fi networks.

Here’s how you can update your network drivers:

1. Press the Windows key + X and select Device Manager from the menu.
2. Expand the Network adapters category.
3. Right-click on your Wi-Fi adapter and select Update driver.
4. Choose the option to search automatically for updated driver software.
5. Follow the on-screen instructions to complete the driver update process.

Updating your network drivers can improve network performance and resolve connectivity issues. If you’re still experiencing problems, you may need to contact your device manufacturer for further assistance.

Reset TCP/IP

Resetting TCP/IP can help resolve Wi-Fi network detection issues on Windows 10. Follow these steps to reset TCP/IP:

1. Press the Windows key + X and select “Command Prompt (Admin)”.
2. In the command prompt window, type “netsh int ip reset” and press Enter.
3. Restart your computer.

This process will reset the TCP/IP stack, which can help fix network connection problems. After resetting TCP/IP, try connecting to your Wi-Fi network again.

If you still can’t connect to the network, try these additional steps:

1. Press the Windows key + X and select “Device Manager”.
2. Expand the “Network adapters” category.
3. Right-click on your Wi-Fi adapter and select “Uninstall device”.
4. Restart your computer and let Windows reinstall the driver for your Wi-Fi adapter.

These steps can often resolve Wi-Fi network detection issues on Windows 10. Give them a try and see if they help you connect to your Wi-Fi network successfully.

Change the wireless SSID and password on your modem

To change the wireless SSID and password on your modem:

1. Open the Wi-Fi settings on your Windows 10 device.
2. Locate the network you want to change the SSID and password for.
3. Right-click on the network and select “Forget” to disconnect from it.
4. Click on the Wi-Fi icon in the taskbar to open the network list.
5. Select the network you just forgot and click on the “Connect” button.
6. Enter the new SSID and password for your modem when prompted.
7. Click on the “Connect” button to establish the connection with the updated information.

Check for malware

1. Open Windows Security: Click on the Start menu, type “Windows Security,” and select the app from the search results.
2. Scan for malware: In the Windows Security app, click on “Virus & threat protection” in the left sidebar. Then, click on the “Quick scan” button to start the scan.
3. Remove any detected malware: If malware is found, follow the on-screen instructions to remove it from your system.

Once you have confirmed your device is malware-free, you can proceed with troubleshooting your Wi-Fi network detection issues.

Oscar Green

Oscar Green is a knowledgeable technology writer for helptechportal.com, concentrating on software development and programming languages. With a degree in Software Engineering and experience as a full-stack developer, Oscar’s articles provide readers with valuable insights and practical tips. In his spare time, he enjoys mentoring new developers and contributing to open-source projects.

Was this article helpful?

YesNo